Latching Relay · HI-G Catalog
2KL-2B-118
2PDT magnetically latching relay
2KL-2B-118 is a hermetically sealed, magnetically latching 2PDT relay with separate DC set and reset coils and 10 pin terminals. Contacts are rated up to 2 A resistive at 28 Vdc, with 100,000 operations electrical life. Coil: 18 Vdc, 580 Ω ±10% at 25°C; maximum coil voltage 22.5 Vdc. Mounting: B — Side flanges. The relay retains its last state after coil power is removed; apply a pulse of at least 15 ms and observe the wiring-diagram polarity.
coil 18 Vdc
Datasheet values · Revision on attached PDF
2KL-2B-118
technical specifications
Values below are taken from the product datasheet associated with this part number. Qualification-specific limits remain governed by the controlled PDF.
- Part number
- 2KL-2B-118
- HI-G series / cross-reference
- 2KL Series
- Qualification
- HI-G Catalog
- Coil voltage code
- 118
- Nominal coil voltage
- 18 Vdc
- Maximum coil voltage
- 22.5 Vdc
- Coil resistance at 25°C
- 580 Ω ±10%
- Operate / reset maximum voltage at 25°C
- 10.0 Vdc
- Operate / reset maximum voltage, −65 to +125°C
- 13.6 Vdc
- Mounting style
- B — Side flanges
- Military reference
- No military part number is listed in the 2KL datasheet.
- Contact arrangement
- 2PDT (2 Form C)
- Resistive contact rating / electrical life
- 2 A at 28 Vdc / 100,000 operations
- Contact resistance
- 50 mΩ maximum
- Operate / reset time
- 5 ms maximum
- Minimum coil pulse width
- 15 ms
- Coil operation
- Separate set and reset coils; retain the last state after coil power is removed. Apply a pulse of at least 15 ms and observe the diagram polarity.
- Coil power
- Approximately 0.73 W, per datasheet
- Insulation resistance
- 1000 MΩ minimum on listed insulation paths
- Dielectric strength
- 500 Vrms, 50 Hz, on listed insulation paths
- Operating temperature
- −65°C to +125°C
- Relative humidity / low air pressure
- 98% at 40°C / 4.0 kPa
- Sinusoidal vibration
- 294 m/s² (approximately 30 g), 10–3000 Hz
- Shock / steady-state acceleration
- 980 m/s² / 980 m/s² (approximately 100 g)
- Hermetic leakage rate
- 1 × 10⁻³ Pa·cm³/s maximum
- Weight / body dimensions
- 14.2 g maximum / 20.5 × 10.5 × 10.5 mm maximum
- Pin terminals / length
- 10 × Ø0.8 ±0.1 mm / 5 ±0.5 mm
- Terminal pitch / outer span
- 5.08 mm / 15.24 mm
- Flanged overall width
- 35 mm maximum
- Unspecified dimensional tolerance
- ±0.3 mm
Technical document · PDF
2KL Series technical datasheet
Electrical characteristics, coil data, contact ratings, environmental limits, terminal styles, dimensions and ordering information for 2KL-2B-118.
HI-G · MIL · competitor codes
Part number cross-reference
HI-G part number: 2KL-2B-118. MIL code: not listed for this product. The entries below are family-level cross-reference candidates from the HI-G comparison table. They do not confirm interchangeability or qualification; verify coil, contacts, terminals, mounting and ratings against the applicable datasheet.
No family-level competitor code is listed for this product in the current comparison table.